Drymix Joint Gris Clair — Light Grey Tile Grout

Drymix — Joint Gris Clair — Light Grey Tile GroutDrymix Joint Gris Clair is the light grey version of Drymix’s CG2WA-grade tile grout. Same high performance as Joint Gris in every respect — water resistance, abrasion resistance and mechanical strength — in a lighter tone that complements light-coloured tiles and modern interior finishes. Compliant with BS EN 13888, ISO 9001 certified.Consumption table (kg/m²) — based on 10 mm thick tiles: – Joint 2 mm: 200×200=0.34 | 300×300=0.23 | 450×450=0.15 | 600×600=0.11 | 600×1000=0.09 – Joint 3 mm: 200×200=0.51 | 300×300=0.34 | 450×450=0.23 | 600×600=0.17 | 600×1000=0.14 – Joint 5 mm: 200×200=0.85 | 300×300=0.57 | 450×450=0.38 | 600×600=0.28 | 600×1000=0.23 – Joint 6 mm: 200×200=1.02 | 300×300=0.68 | 450×450=0.45 | 600×600=0.34 | 600×1000=0.27Product Data: – Pack: 20 kg bag | Colour: Light grey | Joint width: 2–6 mm – Water: 6.6 L per bag | Fresh density: 1,700 kg/m³ – Max aggregate size: 0.450 mm | Grade: CG2WA – Application temperature: 5°C to 35°C (preferred 21°C–26°C) – Shelf life: 5–6 months sealedTechnical Performance (BS EN 13888:2009): – Flexural strength: ≥ 2.5 N/mm² – Compressive strength: ≥ 15 N/mm² (also maintained after freeze/thaw cycles) – Water absorption (30 min): ≤ 5 g | Water absorption (240 min): ≤ 10 g – Shrinkage: ≤ 3 mm/m | Abrasion resistance: ≤ 2000 mm³Application: Same protocol as Joint Gris. Ensure adhesive cured 24 hours. Add 20 kg to 6.6 L water, mix to creamy consistency, rest 2–3 min. Apply with rubber squeegee, wipe excess, sponge clean after ~15 min, polish with dry cloth after 24 hours. Wait 24 hours before wet mopping.Precautions: – Do not apply below 5°C or above 35°C – Protect from wind and direct sunlight – Wear gloves and goggles during handlingAvailable at QBM Hardware, 59 Royal Road, Phoenix, Mauritius. Tel: 230 5858 3474Delivery: Rs 1,200 flat rate (heavy item) island-wide.