Drymix Karopro C2E — Improved High-Performance Tile Adhesive

Drymix — Karopro C2E — Improved Tile AdhesiveDrymix Karopro C2E is an improved cement-based tile adhesive for ceramic, porcelain, glass and porcelain stoneware tiles on interior and exterior walls and floors. Class C2E — the only adhesive in the Drymix range certified for glass tiles. Excellent thixotropic properties prevent slip and sag on vertical surfaces. Tested by LGAI/APPLUS notified laboratory, compliant with EN 12004, ISO 9001 certified.Key differentiators: – Only Drymix adhesive suitable for glass tiles – C2-class adhesion strength: ≥ 1.0 N/mm² – Excellent thixotropic anti-slip properties on vertical surfaces – Extended open time: > 30 min – Suitable for tiles up to 10,000 cm² with back-butteringTile size suitability: All sizes up to 10,000 cm² recommended for interior/exterior floors and walls, wet areas, pools and over existing tiles.Coverage per 25 kg bag: – Single buttering (10×10×10 notch, trowel at 60°): 6.9 m² – Double buttering back adhesion (2.5 mm): 4.3 m² – Double buttering both sides with notched trowel: 3.9 m²Product Data: – Class: C2E – Pack: 25 kg bag – Water: 8.25 L per bag (floor) | 7.0 L per bag (wall) – Mix density: 1,800 kg/m³ – Pot life: 2 hours – Open time: > 30 min | Adjustability: < 60 min – Light foot traffic: after 24 hours – Full use (normal surface): 14 days – Full use (swimming pool): 21 days – Shelf life: 6 monthsTechnical Performance (EN 12004 / ISO 9001 — LGAI/APPLUS certified): – All tensile adhesion values: ≥ 1.0 N/mm² (initial, heat ageing, water immersion, freeze/thaw) – Open time after 30 min: ≥ 0.5 N/mm²Not suitable for: wood, metal, rubber or PVC surfaces; surfaces with strong movement or vibration; where fast-set adhesive is required.Application: Moisten surface with masonry brush. Add bag to water (floor: 8.25 L, wall: 7.0 L), mix smooth, rest 2–3 min. Apply with notched trowel. Back-butter tiles > 400×400 mm for pools, basins and heavy-load floors. Grout walls after 5–8 hours, floors after 24 hours. Minimum joint width 2–5 mm.Precautions: – Wear gloves and goggles during handling – Avoid contact with eyes and skin – In case of contact, rinse abundantly with clean waterAvailable at QBM Hardware, 59 Royal Road, Phoenix, Mauritius. Tel: 230 5858 3474Delivery: Rs 1,200 flat rate (heavy item) island-wide.